Reprint or delete the faxes in memory
You can reprint or delete the faxes stored in memory. You might need to reprint a fax
in memory if your HP all-in-one runs out of paper while receiving a fax. Or, if the
memory of the HP all-in-one becomes full, you might need to clear it in order to
continue receiving faxes.
Note
The HP all-in-one stores all faxes it receives in memory, even when the faxes
are printed. This allows you to reprint the faxes later, if needed. After the memory
becomes full, the HP all-in-one overwrites the oldest, printed faxes as it receives new
faxes.
To reprint faxes in memory from the control panel
1
Make sure you have paper loaded in the input tray.
2
Press
Setup
.
3
Press
6
, and then press
4
.
This selects
Tools
and then selects
Reprint Faxes in Memory
.
The faxes are printed in the reverse order they were received with the most
recently received fax printed first, and so on.
4
If you do not need a fax that is printing, press
Cancel
.
The HP all-in-one begins printing the next fax in memory.
Note
You will need to press
Cancel
for each stored fax in order to stop it from
printing.
To delete all the faxes in memory from the control panel
➔ To delete all the faxes from memory, turn off the HP all-in-one by pressing the
On
button.
All faxes stored in memory will be deleted from memory after you turn off the power to
your HP all-in-one.
User Guide
95