Load postcards or Hagaki cards
You can load postcards or Hagaki cards into the input tray of your HP all-in-one.
For the best results, set the paper type and size before printing or copying. For more
information, see the onscreen HP Image Zone Help.
To load postcards or Hagaki cards in the input tray
1
Remove the output tray.
2
Remove all paper from the input tray.
3
Insert the stack of cards into the far right side of the input tray with the short edge
forward and the print side down. Slide the stack of cards forward until it stops.
4
Slide the paper-width guide inward against the stack of cards until it stops.
Do not overload the input tray; make sure the stack of cards fits within the input
tray and is no higher than the top of the paper-width guide.
5
Replace the output tray.